@scavenger
Joined on April 23rd, 2020, this user has been a member for 2,235 days and is the 35,164th person to register an account.
Has 10 submissions, the first one uploaded on April 23rd, 2020 and the most recent on November 26th, 2023.
Of those, 2 have been featured and 7 have won Users' Choice.
On average, each submission earns 4,045 downloads.
In total, they have been download 40,454 times.
Counting every individual stickfigure, including the contents of all packs, this user has technically made and submitted 103 stickfigures.
On average, when this user rates stickfigures, they are 76% positive.
Has made 345 comments on non-activity pages of the site. Alternatively, this user has made 1,141 comments on actual activity pages of the site.
This member is not a Users' Choice voter.
Show More
-
Greaattttttt… now I can’t keep my hands off this. I wanna keep making posters/pngs for fun now and keep think about making a ST movie for this….
-
Replying to comment by:Nvm. Instead of rewriting it, we can plan it like how some movies do.
-
Replying to comment by:
Oh yeah, I will think more about after Mix Master and his truck is done(plus the effects). Idk how long that’s going to be though. But if done correctly, this book, can be very good.
-
Replying to comment by:
Cdankoihuksmsi
Ansusos suwowkshzoslanauzkksksjaiqkwhssuxhhdjdosisjdhdhe. If so……….. we would have to rewrite hmmmm 70-80% of it and make it longer since the scenes are kinda short in the book. And I want to make a different story since the plot sucks as heck and is cheesy. And also there’s something else that I want to tell you but is a major spoiler if this happens. Also, it’s like a combination of venom and godzilla Kotm lol. -
Replying to comment by:
Do you want me to send the book some how?
-
Ok so um, earlier this year I had to make a book for a project, but I made it to long. Now I’ll explain this much more in the morning. This is a 62 page notebook written by me and ummmm, I’ve been maybe thinking about making it a stick node movie. Of course I would need help(please). This is not official or decided yet. Most of the book would probably have to be rewritten due to the cheesy ness and story. And oh heck yeah, it’s very gory. In this book I tried to make it as gory as possible. But it will probably have to be restricted due to the rules. I can send this(some how) if you want me to if you want to read it. The story, paste, time, etc sucks. But it brings so many good memories back. This took me about a month or so to write. Oh yeah, there are SPOILERS in the images btw.
-
Cool
2020-06-01 14:13:10 UTC -
*repost*
2020-06-01 14:13:14 UTC -
Interesting
Might help if I can and am allowed
2020-06-01 14:25:57 UTC-
Replying to:
Do you want me to send the book some how?
2020-06-01 14:29:21 UTC-
Replying to:
If you desire , we could make Google Doc fully written on it
2020-06-01 14:34:41 UTC-
Replying to:
Cdankoihuksmsi
Ansusos suwowkshzoslanauzkksksjaiqkwhssuxhhdjdosisjdhdhe. If so……….. we would have to rewrite hmmmm 70-80% of it and make it longer since the scenes are kinda short in the book. And I want to make a different story since the plot sucks as heck and is cheesy. And also there’s something else that I want to tell you but is a major spoiler if this happens. Also, it’s like a combination of venom and godzilla Kotm lol.-
Replying to:
Nvm. Instead of rewriting it, we can plan it like how some movies do.
-
-
Oh yeah, I will think more about after Mix Master and his truck is done(plus the effects). Idk how long that’s going to be though. But if done correctly, this book, can be very good.
-
wht the fuck is this
2020-06-01 15:03:41 UTC
-
Replying to comment by:
I am going to make that in the truck mode.
-
Ok so I want to do a test to see what you’re more excited about coming: Mix master or the effects?
-
I’d like Mixmaster more
2020-06-01 02:13:18 UTC -
I do need me some dust effec doh
2020-06-01 02:53:53 UTC-
Replying to:
I am going to make that in the truck mode.
-
Replying to comment by:
Ok so what you’re saying is that there has to be a goal/limit for the smart stretch which is 0. So every time it goes up or down it adds or subtracts the things around it when the node that has the smart stretch on moves. So when it add or subtracts it either goes up one or down one. Hmmmmm. I don’t know how to code but what if for the reversible setting it has a very high number limit that no one would every stretch to. BUT when this setting is on can’t there be a code that when you want to make it reverse it just follows the normal smart stretch. So like every time the normal smart stretch goes up one the reverse would do the same but go down instead. So it’s just basically following the number of times it stretches, but just backwards. Because since the limit is very big and doesn’t know what to do, the reverse will instead follow the normal smart stretch one that has a goal but just opposite. Idk if this makes sense or it will work or help. It’s just a idea or thought to try and resolve this goal/limit problem.
-
Hey @ralph, can there be a setting to where you can make a shape have reverse smart stretch?:
-
mathematically speaking, maybe?
because when you stretch downward, all the lengths and angles, etc, it’s approaching a certain number – 0
but if it were to be reversed, well, what number is that ellipse approaching?
would probably have to be something the user sets in addition to making it “reverse” smartstretchand then we enter into the realm of, is this over-complication of the UI worth it for the majority of users? Like are there actual use cases to warrant this
2020-05-31 21:31:43 UTC-
Replying to:Cylinders, cubes, doors, really most 3D objects
The pedals on my bike fig (did you get the thumbnail for it?) could have used it
So ye, reverse smart stretch would be useful
2020-05-31 21:35:56 UTC-
Replying to:
ah, you got me with that door, i understand the concept now
hm
big hm
ps before he says it i know @ arcionek you suggested this already just chill your beans
i dare not @ him because he’ll just pile on more ideas
2020-05-31 21:44:49 UTC-
2020-05-31 21:48:37 UTC -
Replying to:Mfw reverse smart stretch was already suggested
Mfw I was approving of that idea
Mfw you said no before
Mfw there’s no picture to correctly portray my reaction
2020-06-01 07:36:22 UTC-
Replying to:
i think you think i say “no” to things you suggest when in reality I think i default to more of a “I’ll see” and/or “maybe eventually” type of response
…with also some no’s peppered in here and there ngl
2020-06-01 12:12:13 UTC-
Replying to:
I sense a “no” as soon you immediatelly realise the danger of how many bug reports I’d submit to you in the first 48h after the feature is implemented.
2020-06-01 13:36:55 UTC
-
Replying to:
Ok so what you’re saying is that there has to be a goal/limit for the smart stretch which is 0. So every time it goes up or down it adds or subtracts the things around it when the node that has the smart stretch on moves. So when it add or subtracts it either goes up one or down one. Hmmmmm. I don’t know how to code but what if for the reversible setting it has a very high number limit that no one would every stretch to. BUT when this setting is on can’t there be a code that when you want to make it reverse it just follows the normal smart stretch. So like every time the normal smart stretch goes up one the reverse would do the same but go down instead. So it’s just basically following the number of times it stretches, but just backwards. Because since the limit is very big and doesn’t know what to do, the reverse will instead follow the normal smart stretch one that has a goal but just opposite. Idk if this makes sense or it will work or help. It’s just a idea or thought to try and resolve this goal/limit problem.
2020-05-31 21:54:14 UTC-
Replying to:
it would basically have to be some multiple number
like in the 3D door example thatguy said
the door part would start off at like 1 thickness
and whent he door is fully “opened” you would want it to be for example, idk, 20 thickness
so the user would have to set the Reverse S-S Multiple to 20 I suppose
it is feasible and i might give it a go
2020-05-31 21:58:54 UTC
-
Replying to comment by:
Thank you
-
Replying to comment by:
This is not officially new. I just want to try it.
-
-
This is not officially new. I just want to try it.
2020-05-31 19:26:04 UTC-
Replying to:looks good
2020-05-31 19:27:28 UTC-
Replying to:
Thank you
-
Replying to:
np
2020-05-31 19:37:44 UTC
-
-
-
Replying to comment by:
Thank you. It’s like a snap on part to confirm that position.
-
Replying to comment by:
- Load More
Ooooo