Replying to: Ralph (Developer)https://pastebin.com/raw/ssjWEXJc

undo=Undo
redo=Redo
modeNormal=Mode: Normal ({0}%)
modePanning=Mode: Panning ({0}%)
modeCamera=Mode: Camera ({0}%)
modePlaying=Playing…
zoomNodeCount=Zoom: {0}%\nNode count: {1}/{2}

appTools=App Tools
newProject=New project…
openProject=Open project…
getPro=Get Stick Nodes Pro\n(Sounds, MP4, no ads!)
rateSN=Rate Stick Nodes\n(It helps the developer!)
rateSNPro=Rate Stick Nodes Pro\n(It helps the developer!)
visitWebsite=Visit StickNodes.com\n(Tutorials, stickfigures, etc)
appSettings=App settings

projectTools=Project Tools
save=Save
saveAs=Save as…
exportGIF=Export GIF / PNG…
exportMP4=Export MP4…
exportMP4ProOnly=Export MP4…\n(Pro feature only)
txtBackground=A project may contain only one background image.
loadBGImage=Load BG image…
clearBGImage=Clear BG image
backgroundScaleX=Background\nscale X
backgroundScaleY=Background\nscale Y
txtOnionSkin=Onion-skin in front or in back?\nBack is default, front helps when you otherwise can’t see the onion skin.
showBack=Show in back
showFront=Show in front
projectNotSaved=(Project not saved!)

animationTools=Animation Tools
animationFPS=Animation FPS ({0} – {1})
txtTweening=Tweening makes your animations smoother by adding in-between frames. The “looping” checkbox is for tweening the last frame into the first frame.
tweeningOn=Tweening on
isLooping=Is looping animation
tweenedFrames=Tweened frames ({0} – {1})
txtTweeningDisabled=Tweening is disabled.
txtTweeningInfo=Tweened FPS is {0}, actual tweened frames is {1}.\n(Tweened frames may be reduced so actual FPS
createNewStickfigure=Create new stickfigure >
downloadStickfigures=Download stickfigures
submitStickfigure=Submit a stickfigure…

textfieldTools=Textfield Tools
addTextfield=Add textfield
copyTextfield=Copy textfield
pasteTextfield=Paste textfield
deleteTextfield=Delete textfield
txtTextAlignment=Set text and alignment
left=Left
center=Center
right=Right
textfieldColor=Textfield color
textfieldScale=Textfield scale
hello=Hello

cameraTools=Camera Tools
copyCamera=Copy camera
pasteCamera=Paste camera
cameraZoom=Camera zoom
centerCamera=Center camera

frameTools=Frame Tools
backgroundColor=Background color
useGradient=Use gradient
expandGradient=Expand gradient
doNotUseBGImage=Do not use BG image
doNotTween=Do not tween this frame
silenceSounds=Silence all sounds
txtFrameDelay=Set a frame delay (in seconds) to have this frame pause for a moment.
importSound=Import a sound…
txtSoundsPro=Sound to play this frame:
txtSounds=(Sounds are Pro feature only)
playSound=Play sound
deleteSound=Delete sound
soundVolume=Sound volume

stickfigureTools=Stickfigure Tools
copyStickfigure=Copy stickfigure
pasteStickfigure=Paste stickfigure
deleteStickfigure=Delete stickfigure
flipX=Flip X
flipY=Flip Y
pushBackward=Push backward
pushForward=Push forward
centerStickfigure=Center stickfigure
stickfigureColor=Stickfigure color
stickfigureScale=Stickfigure scale
rotateStickfigure=Rotate stickfigure
lockStickfigure=Lock stickfigure movement
keepStickfigureTween=Keep stickfigure during tween
txtJoining=After clicking “Join stickfigure to…”, press the node to which you’d like to join this stickfigure.
join=Join stickfigure to…
unjoin=Unjoin stickfigure
previousStickfigure=Select previous stickfigure
nextStickfigure=Select next stickfigure

segmentTools=Segment Tools
useSegmentColor=Use segment color
useGradientColor=Use gradient color
reverseGradient=Reverse gradient
useSegmentScale=Use segment scale
segmentThickness=Segment thickness\n(0 = invisible)
resetThickness=Reset thickness
setSegmentAngle=Set segment angle
isStretchy=Is stretchy
resetLength=Reset length

specialSegmentTools=Special Segment Tools
static=Is static\n(non-moving)
txtSegmentPush=Move segments back/forward to have them drawn in the correct order.
pushBack=Push back
pushForward=Push forward
sendToBack=Send to back
sendToFront=Send to front
txtFlipSegment=Flip this segment and children.
txtLimbType=Change limb type
splitSegment=Split segment
deleteSegment=Delete segment
copySegment=Copy segment
copySegmentChildren=Copy segment and children
pasteSegment=Paste segment

creationModeTools=Creation Mode Tools
addStickfigureToLibrary=Add stickfigure to library…
saveStickfigure=Save stickfigure to file…
cancel=Cancel…
txtTracingBackground=Load a background image to trace from.
backgroundTransparency=Background transparency

drawTools=Draw Tools
none=None
segment=Segment
roundedSegment=Rounded segment
circle=Circle
triangle=Triangle

showingDrawOrder=Showing draw order
notShowingDrawOrder=Not showing draw order
showingAllNodes=Showing all nodes
showingNonStaticNodes=Showing non-static nodes
notShowingNodes=Not showing nodes

addFrame=Add frame
deleteFrame=Delete frame
copy=Copy
paste=Paste
stickfigures=Stickfigures

copyColor=Copy color
pasteColor=Paste color

splashScreen1=Stick Nodes® version {0} ({1}).\nCopyright 2014 – {2} {3}. All rights reserved.\nThis is the {4} time you’ve opened Stick Nodes ({1})!
splashScreen2=Visit StickNodes.com to join the community, see tutorials,\nor download some of the thousands of available stickfigures!
splashScreenProTitle=PRO VERSION FEATURES
splashScreenProInfo=NO ADS!\nEXPORT AS MP4 VIDEO!\nNO WATERMARK ON EXPORTS!\nADD *SOUNDS* TO YOUR ANIMATIONS!

areYouSureTitle=Are You Sure?
okay=Okay
cancel=Cancel
on=On
off=Off

addToLibraryTitle=Add Stickfigure To Project’s Library
addToLibraryInstructions=Give a unique name to this stickfigure.
addToLibraryNameTaken=Sorry, that name is taken, try another one.
stickfigureEmptyName=Come on, this stickfigure deserves a name, go and give it one.
addToLibraryInfo=This will add this stickfigure to your current project so you can animate it.\n\nYou will be able to edit it further with the “Edit stickfigure” button under “Library Tools”.
stickfigureName=Stickfigure name:
addToLibrary=Add to library

appSettingsTitle=App Settings
appSettingsInfo=Stick Nodes is version {0}. You are using {1} version {2}.
setTouchPrecision=Set touch precision
appSettingsTouchPrecision=Select the accuracy of touches for the nodes on a stickfigure. Precise touches are only recommended if you use a stylus, not your fingers.
approximateTouches=Approximate touches\n(Fingers)
preciseTouches=Precise touches\n(Stylus)
selectLanguage=Select language
appSettingsLanguage=PLEASE NOTE, APPLYING CHANGES AFTER SELECTING A NEW LANGUAGE WILL RESTART THE APP!\n\nYou will lose any unsaved changes to your project unless you save first.
applyChanges=Apply changes
viewCredits=View credits
viewChangelog=View {0} changelog

backgroundOverwriteTitle=This Will Clear The Current Background
backgroundOverwriteInfo=A project can only contain one background image due to limitations. To load another background, the current background must be cleared, this CANNOT be undone!\n\nUnless you still have this image on your device, you will not be able to set it as the background again.\n\nAre you sure you want to do this?
yesClear=Yes, clear
noCancel=No, cancel

cancelCreateInfo=If you didn’t save this stickfigure or add it to the library, you will lose all edits and modifications you just made.
yesSure=Yes, I’m sure

clearBackgroundTitle=Clearing The Background Cannot Be Undone
clearBackgroundInfo=You are about to clear the current background image of this project, this CANNOT be undone!\n\nUnless you still have this image on your device, you will not be able to set it as the background again.\n\nAre you sure you want to do this?

deleteSoundInfo=You are about to delete the sound:\n\n{0}\n\nThis will delete the sound from the project and remove it from any frames that are currently using it.\n\nThis CANNOT be undone, do you want to delete it?
yesDelete=Yes, delete

exitTitle=Are You Sure You Want To Exit?
exitInfo=Please be sure to save your current project before exiting to prevent losing everything you just created!
yesExit=Yes, exit

exportGifTitle=Export Animation As Animated GIF
validName=Please give a valid file name.
exportEmptyName=Come on, this animation deserves a name, go and give it one.
exportGifInfo=This will export your animation as an animated GIF file that can be shared with others. This file will export to the photos on your device. You can access and share it from there.
animationTitle=Animation title:
exportWidthHeight=Set the width and/or height of the exported file. Note that the exported file will always keep a 16:9 ratio. (Higher values here will SIGNIFICANTLY increase render time.)
width=Width:
height=Height:
exportTweeningInfo=If tweening is on, extra interpolated frames are added between keyframes in the animation. As a result, the FPS will increase to keep the animation at the correct speed.
exportAnimationStats=Tweening: {0}\nFPS: {1}\nFrames: {2}\nTime: {3}
exportGifDitherDisabled=Dither disabled (recommended)
exportGifDitherEnabled=Dither enabled (may help when using background image)
exportGifRenderTime=Rendering may take a while depending on your device, the number of frames, and the dimensions of the exported GIF file – just relax for a little bit.
exportGif=Export GIF

exportMp4Title=Export Animation As MP4 Video
exportMp4Info=This will export your animation as an MP4 video file that can be shared with others. This file will export to the photos on your device. You can access and share it from there.
exportMp4Issues=If you experience issues exporting an MP4 with the new faster way, please try the old method!
exportMp4Sounds=Export MP4\n(with sounds)
exportMp4NoSounds=Export MP4\n(no sounds)
exportMp4OldSounds=(Old)\nExport MP4\n(with sounds)
exportMp4OldNoSounds=(Old)\nExport MP4\n(no sounds)

filenameConflictTitle=Filename Conflict
overwriteInfo=A file with that name already exists at the destination:\n{0}\n\nDo you want to overwrite it?
yesOverwrite=Yes, overwrite

exportProgressTitle=Exporting Animation…
exportProgressInfo1=Please don’t leave this screen, it may result in errors. (Don’t press the “home” button or anything like that.)\n\nProgress may be very slow, it depends on the size of the project and the processing power of your device.\n\n(You can significantly speed up this process if you choose a smaller resolution at which to export.)
exportProgressInfo2=If this is an animation with sounds, it may sit at 100% for a while, give it some time.

finishedExportingTitle=Finished Exporting
finishedExportingInfo1=Your animation has finished exporting to an {0}. You can find it in your Photos app. View it and share it to any social network from there!
finishedExportingInfo2=NOTE iOS USERS: iOS does not play animated GIFs in the Photos app – it will appear non-moving. You’ll have to use a “GIF viewer” app or upload it somewhere (Imgur.com for example) and view it in your browser.
animatedGifFile=animated GIF file
mp4VideoFile=MP4 video file
share=Share

importTitle=Import Stickfigure
importInfo=Please choose a stickfigure file to import. Listed below are all of the stickfigures found in the Stick Nodes folder on your device.\n\n(Check StickNodes.com for thousands of more stickfigures!)\n\nStick Nodes can also import Pivot-created STK files too! (Version 2.2.7 or lower only. Note that you can re-save version 3.0 and higher STK files as version 2.2.7 using Pivot 4.0 on a Windows PC.)
filterList=Filter the list below, type here…
import=Import
deleteDevice=Delete from device

importSoundTitle=Import Sound
importSoundInfo1=Please choose a sound file to import. Listed below are all of the sounds found in the Stick Nodes folder on your device.\n\nPlease also note that if an imported sound’s filename clashes with an existing sound, the import will fail.\n\nStick Nodes can only recognize MP3 files that are LESS than 256kb in size.
importSoundInfo2=IMPORTANT: Once you import a sound file, DO NOT MOVE, RENAME, OR DELETE THE FILE FROM YOUR DEVICE!\n\nSounds are not stored in a Stick Nodes project, so if you move, rename, or delete the sound file from your device, the sound will also be removed from your Stick Nodes animation.
importSoundInfo3=(You can add your own sounds to this list as well, see the FAQ page on StickNodes.com for instructions!)

isOpeningTitle=Opening Project…
isOpeningInfo=Project is opening. Please wait until this dialog goes away.
isOpeningWarning1=DO NOT LEAVE THE APP OR THE PROJECT MAY NOT OPEN PROPERLY!
isOpeningWarning2=(Don’t go to the home screen or switch apps.)\n\nThis may take a few seconds or minutes, depending on your project size and device power.

isSavingTitle=Saving Project…
isSavingInfo=Project is saving. Please wait until this dialog goes away.
isSavingWarning1=DO NOT LEAVE THE APP OR YOUR PROJECT MAY NOT SAVE PROPERLY AND YOU WILL LOSE ALL OF YOUR PROGRESS!
isSavingWarning2=(Don’t go to the home screen or switch apps.)\n\nThis may take a few seconds or minutes, depending on your project size and device power.

languageAppResetTitle=New Language, App Will Restart
languageAppResetInfo=You have selected a new language. In order to apply this setting, the app has to restart.\n\nYOU WILL LOSE ANY UNSAVED CHANGES.\n\nPlease make sure your project is saved before proceeding.
yesRestartApp=Yes, restart app

leavingAppTitle=You Will Leave The App
leavingAppInfo=Just a note that you clicked a button that will take you to {0}.\n\nIt is highly recommended you make sure your project is SAVED first, as the app may restart upon returning!\n\nAre you sure you want to leave the app?
leavingViewAppListing=view the Stick Nodes Pro app listing
leavingRateApp=rate this app
yesImSure=Yes, I’m sure

newProjectInfo=You are about to close this project and start a new one.\n\nIf you didn’t save this project, it will be deleted and you will never be able to access it again!
newProject=New project

openProjectTitle=Open Project
openProjectInfo1=Please choose a project to open.
openProjectInfo2=Depending on your device and the size of the project, it may take a few seconds for the project to completely load and for the screen to change. Please be patient!
open=Open

openingProjectWarningTitle=A Project File Is About To Be Opened
openingProjectWarningInfo=A project file ({0}) has been requested to open.\n\nDo you wish to proceed?\n\nIf you haven’t saved the current project and you wish to, please cancel and save first. You won’t get another chance!
yesOpen=Yes, open

permaDeleteProjectInfo=You are about to delete an entire project file from your device. You cannot undo this and you will not be able to replace this file unless you have it saved somewhere else.\n\nYou are about to delete the file\n{0}
permaDeleteSoundInfo=You are about to delete sound file(s) from your device. You cannot undo this and you will not be able to replace this file(s) unless you have it saved somewhere else.\n\nNote: Any projects that already use this sound file WILL ALSO BE AFFECTED, they will report that a sound is missing and the sound will be removed from the project.
permaDeleteStickfigureInfo=You are about to delete stickfigure file(s) from your device. You cannot undo this and you will not be able to replace this file(s) unless you have it saved somewhere else.\n\nNote: Any projects that already use this stickfigure will be UNAFFECTED, this will only prevent you from being able to import this stickfigure in future projects.

saveProjectAsTitle=Save Project As
saveProjectAsBlankName=Come on, this project deserves a name, go and give it one.
saveProjectAsInfo=This will save your project file to the Stick Nodes folder on your device.
projectTitle=Project title:
saveProject=Save project

stickfigureSaveAsTitle=Save Stickfigure As
stickfigureSaveAsInfo=This will save your stickfigure to a file in the Stick Nodes folder so you can import it into other projects or even share it with others.\n\nNote that this will not add the stickfigure to your current project, to do that use the “Add to library” button.
saveStickfigure=Save stickfigure

submitTitle=Submit Stickfigure To StickNodes.com
submitInstructions=Submissions are done through email – just fill in the details below and a submission email will be composed for you!
submitInstructions2=After submitting, it may take a FEW DAYS for your submission to appear on the website due to the amount of submissions per day. Please DO NOT submit more than once.
submitError1=Can’t submit this stickfigure yet, please make sure you’ve entered the author and stickfigure name!
submitError2=Can’t submit this stickfigure yet, did you select which stickfigure file you want to send? Click the dropdown below and select one!
stickfigureToSubmit=Stickfigure to submit:
whoMadeThis=Who made this?:
category=Category:
people=People
vehicles=Vehicles
weapons=Weapons
objects=Objects
effects=Effects
backgrounds=Backgrounds
miscellaneous=Miscellaneous
stickfigureDescription=Stickfigure description:
submit=Submit

errorSubmittingTitle=Error Submitting Stickfigure
errorSubmittingInfo=Sorry, but your device is not set up to send email (maybe you don’t have a Mail account set up?). As a result, this stickfigure cannot be submitted.
errorSubmittingInfo2=Sorry, but you can’t submit any stickfigures because no external storage is detected.\n\nPossible solutions include either inserting an SD card or safely disconnecting your device from a computer and trying again.

frameCountWarningTitle=Frame Count Warning
frameCountWarningInfo=Your project contains {0} frames.\n\nDepending on your device, you may run into memory issues. This can lead to random crashes or PROBLEMS SAVING.\n\nSome devices can handle 1000+ frames, some can’t even handle 500.\n\nIt is recommended you think about starting a new project as a “part two” continuation. You can always export both projects and splice them together as a single video afterwards with a video-editing app if you so desire.

nodeLimitWarningTitle=Can’t Add More Nodes
nodeLimitWarningInfo1=This stickfigure currently has {0} nodes. You can’t any more to it (limit is {1}). Sorry about that, mobile devices restrictions.
nodeLimitWarningInfo2=This stickfigure currently has {0} nodes. You can’t paste {1} nodes onto it (limit is {2}). Sorry about that, mobile devices restrictions.

stickfigureLimitWarningTitle=Can’t Add More Stickfigures
stickfigureLimitWarningInfo=This frame currently containers the maximum number of stickfigures ({0}). Sorry about that, mobile device restrictions.

textfieldLimitWarningTitle=Can’t Add More Textfields
textfieldLimitWarningInfo=This frame currently containers the maximum number of textfields ({0}). Sorry about that, mobile device restrictions.

cantJoinTitle=Can’t Join Stickfigures
cantJoinInfo=This join can’t be done as it would cause a join cycle (when a stickfigure is joined to a stickfigure which is already joined to the first stickfigure).\n\nThis would be very bad.

errorSavingStickfigureTitle=Error Saving Stickfigure
errorSavingStickfigureInfo=Sorry, but Stick Nodes can’t detect any external storage.\n\nPossible solutions include either inserting an SD card or safely disconnecting your device from a computer and trying again.

noExternalStorageTitle=No External Storage Found
noExternalStorageInfo=Stick Nodes can’t detect any external storage on this device. While you can still use the app, you will not be able to save or export anything you create.\n\nPossible solutions include either inserting an SD card or safely disconnecting your device from a computer.

errorSavingSpaceTitle=Error Saving (No Space Available)
errorSavingSpaceInfo=Sorry, Stick Nodes cannot save this file because the device doesn’t have enough storage space left.

errorSavingTitle=Error Saving
errorSavingInfo=Sorry, but Stick Nodes can’t save this project because no external storage is detected.\n\nPossible solutions include either inserting an SD card or safely disconnecting your device from a computer and trying again.

imageLoadErrorTitle=Can’t Load Image File
imageLoadErrorInfo=Sorry, Stick Nodes can’t load the image you selected.\n\nMake sure the file is actually local and on your device and is NOT a remote image from the internet (Google Photos, Dropbox, iCloud, etc).\n\nAlso, do not select an animated GIF file.

photosDeniedTitle=Access To Photos Is Denied
photosDeniedInfo=You can’t select a background image because {0} has been denied access to Photos.\n\nTo correct this, first SAVE your project and then go to “Settings > {0}” and allow access to Photos. Then come back and try again.
photosDeniedExportInfo=You can’t export your animation because {0} has been denied access to Photos.\n\nTo correct this, first SAVE your project and then go to “Settings > {0}” and allow access to Photos. Then come back and try again.

errorOpeningTitle=Error Opening Project
errorOpeningInfo1=Sorry, Stick Nodes ran into an error while opening this project.\n\nIf you believe this file is a valid STKNDS file, PLEASE MAKE SURE YOUR STICK NODES APP IS UP TO DATE and try again.
errorOpeningInfo2=Sorry, but Stick Nodes can’t open any projects because no external storage is detected.\n\nPossible solutions include either inserting an SD card or safely disconnecting your device from a computer and trying again.

errorImportingTitle=Error Importing Stickfigure
errorImportingInfo1=Sorry, Stick Nodes ran into an error while importing this stickfigure.\n\nIf you believe this file is a valid NODES file, PLEASE MAKE SURE YOUR STICK NODES APP IS UP TO DATE and try again.
errorImportingInfo2=Sorry, Stick Nodes ran into an error while importing this stickfigure.\n\nStick Nodes can only import Pivot STK files created with Pivot version 2.2.7 and lower. Also please note that Stick Nodes will not allow stickfigures with more than {0} nodes.
errorImportingInfo3=Sorry, but Stick Nodes can’t import any stickfigures because no external storage is detected.\n\nPossible solutions include either inserting an SD card or safely disconnecting your device from a computer and trying again.

exportCancelledTitle=Export Cancelled
exportCancelledInfo=The {0} export process has been cancelled.

encoderFailTitle=MP4 Encoder Failed To Start
encoderFailInfo=Sorry, but Stick Nodes ran into an error when starting to encode an MP4 of your animation.\n\nAn error report has been sent to the developer to provide information and help fix this issue.\n\nIn the meantime, maybe try the other MP4 export method?

preciseTouchesWarningTitle=Precise Touches (Stylus) Is Enabled
preciseTouchesWarningInfo=Just a warning that you have previously enabled “precise touches” in the app settings.\n\nUnless you’re using a stylus, touching nodes will be difficult unless you reset this to “approximate touches” in the settings.\n\nTo change this, please go to “App settings” under “App Tools”.

animationExportFailedTitle=Animation Export Failed
animationExportFailedInfo1=Your animation has failed to export.\n\nIf you didn’t allow {0} to access your Photos, this will cause your exports to fail. To correct this, first SAVE your project and then go to “Settings > {0}” and allow access to Photos. Then come back and try again.\n\nIf this is not the problem, then do you have enough storage space left on your device? Try saving at a lower resolution.
animationExportFailedInfo2=Your animation has failed to export. Do you have enough storage space left on your device? Try saving at a lower resolution.
animationExportFailedInfo3=Sorry, but Stick Nodes can’t export this animation because no external storage is detected.\n\nPossible solutions include either inserting an SD card or safely disconnecting your device from a computer and trying again.

soundsErrorTitle=Problem Finding Sounds
soundsErrorInfo1=When opening this project, Stick Nodes couldn’t find some sound files that were referenced!\n\nPlease remember, sound files are not stored in a Stick Nodes project. As a result, if you move, rename, or delete one of these sounds from your device, it will also be removed from your Stick Nodes animation.\n\nThe following sound file(s) were missing from your device:
soundsErrorInfo2=If you replace the missing sound file(s), you can close (do not save!) and re-open this project and Stick Nodes should correctly find them next time.

soundsRemovedTitle=Sounds Were Removed
soundsRemovedInfo=Stick Nodes has detected that you’re trying to open a project that contains sounds.\n\nSince sounds are a Pro-only feature, they had to be removed upon opening this project, sorry about that.

errorImportingSoundTitle=Error Importing Sound
errorImportSoundInfo1=Sorry, Stick Nodes ran into an error while importing this sound file.\n\nMake sure the file is an MP3 file that is LESS THAN 256kb in size.
errorImportSoundInfo2=A sound with the same name already exists in the library.
errorImportSoundInfo3=The selected sound file is over 256kb in size.
errorImportSoundInfo4=Sorry, but Stick Nodes can’t import any sounds because no external storage is detected.\n\nPossible solutions include either inserting an SD card or safely disconnecting your device from a computer and trying again.

aboutTweeningTitle=About Tweening
aboutTweeningInfo=Okay, here’s a “quick” explanation on what tweening is all about. (This message will only be shown once for this project.)\n\nWhen tweening is on, your chosen number of tweened frames are added in between each keyframe, this makes your animation look smoother. To account for this, the FPS increases. However, the overall FPS is limited to a max of 60, keep that in mind! The app will remove tweened frames, regardless of what you’ve chosen, in order to keep the animation running at a max FPS of 60.\n\nPlease note, the app can only “guess” your movements, so tweened stickfigures may behave odd. If this happens, you’ll either have to disable tweening on that frame or tweak your animation poses to make the movement clearer.\n\nAlso note, the app identifies how a stickfigure maps to itself across the frames by a unique ID number that is given to it upon creation.\n\nThis is important because if a stickfigure is accidentally deleted, you can’t simply add in an identical stickfigure from the library and expect the app to tween it correctly from the previous frame to the current frame. Instead, you must go back to the previous frame, copy the stickfigure in question, and then paste it back into the frame it was deleted from. This way, the unique ID it was assigned is preserved and tweening will work correctly.

aboutLoopingTitle=About Looping
aboutLoopingInfo=Okay, here’s a “quick” explanation on what looping is all about. (This message will only be shown once for this project.)\n\nIf you don’t have tweening enabled, don’t worry about this checkbox.\n\nIf you DO have tweening enabled AND your animation is supposed to loop, make sure this checkbox is checked. What this does is simply have the last frame tween smoothly into the first frame to result in a seamless loop.

tooltipFrameToolsFree=Tap for “Frame Tools”
tooltipFrameToolsPro=Tap for “Frame Tools”\n(and also SOUNDS)
tooltipStickfigureTools=Tap for “Stickfigure Tools”

changelogTitle=Welcome To {0}
changelogInfo=Here is a list of what has changed in the new version!\n(You can read this message again by going into “App settings” under “App Tools”.)
changelogOld=Below are recent changes

scrollDownForSounds=(Scroll down for sounds!)

interfaceDialogTitle=Thanks For Downloading Stick Nodes!
interfaceDialogInstructions=Please read this important message about how the menus work in Stick Nodes.\n\n- To see the “Stickfigure Tools” menu, tap a stickfigure you want to modify.\n- To see the “Frame Tools” menu, tap a frame you want to modify (at the top).\n- To see the “Textfield Tools” menu, tap a textfield you want to modify.\n- To see the “Camera Tools” menu, go into Camera mode or tap the camera.\n- To see all other menus, tap a blank area on the stage.
interfaceDialogInstructionsPro=YOU HAVE STICK NODES PRO, WHICH MEANS YOU CAN ADD SOUND EFFECTS TO YOUR ANIMATIONS.\nYou can import/add sounds to frames under the “Frame Tools” menu.
interfaceDialogInstructions2=This message will only be shown for the first few times you open the Stick Nodes app!

zipImportedTitle=The ZIP File Has Been Imported!
zipImportedErrorTitle=The ZIP File Could Not Be Imported.
zipImportedErrorInfo=There was an error when attempting to import the ZIP file.
zipImportedErrorNotZipInfo=This was not a ZIP file, only ZIP files can be opened – NODES files are automatically taken from your downloads, no need to import.

saveReminder=Save reminder
saveReminderInfo=The app will remind you to save every few minutes. Set this to 0 minutes to disable.

magnifierInfo=The magnifier helps by allowing you to see/select nodes that are very close together, all while staying at a comfortable zoom on the main stage.
showMagnifier=Show magnifier

sendFiles=Send files
sendFilesInfo=Use this form to send Stick Nodes files to someone.\n\nSelect any projects, stickfigures, or sound files that you want to attach to an email. Once done, an email will be composed for you, then you can just fill in a to-address and send.\n\nNote that this does require some working Mail, Gmail, or any email-app on your device.
sendProjectFile=Project file:
sendStickfigureFile=Stickfigure file:
sendSoundFile=Sound file:
sendButton=Send

errorSendingTitle=Error Sending Files
errorSendingInfo=Sorry but your device is not set up to send mail.

rememberToSaveTitle=Remember To Save?
rememberToSaveInfo=This is a reminder to save your project!\n\nYou can disable this or change the timer in “App settings” if you want.

fullscreen=Fullscreen
fullscreenProOnly=Fullscreen\n(Pro only)

stickfigureFilters=Stickfigure Filters
stickfigureFiltersInfo=These filters will only be visible on the main stage area and MAY CAUSE LAG. There will be no lag in exported animations.
proOnly=Pro only
opacity=Opacity
invertColor=Invert color
tint=Tint
saturation=Saturation
blur=Blur
horizontal=Horizontal
vertical=Vertical

showGuides=Show guides

clearingFrameInfo=Clearing a frame cannot be undone. Do you want to clear this frame?

aboutMagnifierTitle=About Magnifier
aboutMagnifierInfo=The magnifier is only for selecting nodes. After selecting a node, grab and move the node in the main stage area, it will stay selected to be easily grabbed.

cameraVisibleSettings=The below settings will only be visible when playing the animation.

widescreenEffect=Widescreen effect
showWatermark=Show watermark
watermarkColor=Watermark color

clearFrame=Clear frame

outlineSelection=Outline selection

exportAndroidFix=Only check this box if you’ve previously had exports come out weird on your device, this may correct the issue

splashProFeatures1=ADD SOUNDS TO YOUR ANIMATIONS
splashProFeatures2=EXPORT MP4 VIDEO (FOR YOUTUBE)
splashProFeatures3=STICKFIGURE EFFECTS (BLUR, TINT, AND MORE)

showFilters=Show filters
filterLag=Filters can cause lag, disable filters for better performance. (Filters look much better when exported.)

enableDisableTitle=Enable or disable
enabled=Enabled
disabled=Disabled

axisLockingInfo=AXIS-LOCKING\n(Auto-assist to keep stickfigure/camera dragging in a straight line)
doubleTouchInfo=DOUBLE-TOUCH\n(First touch will only select a node, second touch allows it to be dragged)

sensitivityTitle=Sensitivity
nodePrecision=Node-selection precision
axisPrecision=Axis-locking precision
low=Low
high=High

arrowsInfo=Use the arrows window for precise, pixel-perfect movements.
showArrows=Show arrows

backgroundOnTop=Background on top

openHavingProblems=HAVING PROBLEMS? SCROLL DOWN FOR HELP.
openHavingProblemsTitle=Having problems opening a project?
openHavingProblemsInfo=While rare, some users may run into crashes when opening large projects. This depends entirely on the memory limits of their device.\n\nIf you’re having this problem, use the below slider to open a smaller percentage of the file.\n\nWhat this does is load less than 100% of all frames in the project, thus limiting memory consumption and allowing the device to properly open the large project. Try near-100% numbers first, and decrease until the crashes stop.\n\nThe compromise is that you will not be able to get those frames back. But at least you’ll be able to open the project, and export it. After, if you wish to continue the project, it is recommended you start a new project file as a “part 2” continuation.
openHavingProblemsPercent=Percentage of project to open

traceMenu=Load a stickfigure to be the background, and trace over the top of it.
traceStickfigure=Trace stickfigure…

traceStickfigureTitle=Select a Stickfigure To Trace
traceStickfigureInfo=Below is a list of all currently-imported stickfigures. Select one to be used as the background, to trace from.
traceThis=Trace this

copyContextInfo=Choose how many frames to copy – this one, plus how many after it?

iosMP3DownloaderProblemTitle=Problem With URL
iosMP3DownloaderProblemInfo=There is a problem with this URL.\n\nIt should be an MP3 file (end with .mp3).
iosMP3DownloaderTitle=Download This MP3 Sound File?
iosMP3DownloaderInfo=You are about to download the MP3 sound file from this URL:
iosMP3DownloaderInfo2=This process will download the MP3 file into the Stick Nodes app on your device. Make sure the URL is valid and properly formatted.\n\nIt may take a few seconds after pressing “Download” for anything to happen.\n\nThe sound file MAY FAIL downloading or may be over the sound file size limit. If this happens, you won’t see the file available in your sound import list.\n\nDO NOT DOWNLOAD MUSIC MP3 FILES OR ANY VERY LARGE SOUND FILES (MANY SECONDS LONG).\n\nEven if the download succeeds, the app will not allow you to import such a large file to use in your animations.
download=Download

nameThisSound=Name this sound:
emptySoundName=Please give a name for this sound!

soundFileAddedTitle=Sound File Added
soundFileAddedInfo=The sound file “{0}” was added successfully. Check the sound import list to import it.
soundFileNotAddedTitle=Sound File Not Added
soundFileNotAddedInfo=Sorry, but the sound file “{0}” could not be added.\n\nThis could be because the file size is more than 256kb or is not an MP3 file, this is not allowed.

importSoundInfo3ios=(Scroll to bottom of this window for IOS instructions on how to add more sounds to this list!)
importSoundInstructionsTitleIOS=How to add more sounds
importSoundInstructionsIOS=If you want to import a sound already on your device (for example, an email attachment), long-press the file and then use “Import with Stick Nodes Pro”.\n\nIf you want to download a file from the internet, go to the MP3 file URL in your browser (Safari) and replace “http” with “stknds”, then press enter. You will be redirected to Stick Nodes Pro to download the file.\n\nSee the below image for examples of both methods above.\n\nNote, this will only work for MP3 files under 256kb – so NO MUSIC FILES OR VERY-LONG SOUNDS (MANY SECONDS LONG).

alphabetical=Alphabetical
newest=Newest
oldest=Oldest

addTweenedFrameInstructionsTitle=Adding a Tweened Frame
addTweenedFrameInstructionsInfo=Adding a tweened frame is useful for getting the app to animate for you.\n\nIt’s like adding a frame, but instead of the new frame being an exact clone of the old one, it is instead tweened (10/90, 33/67, 50)% towards the next frame.\n\nNote: This means you can only add a tweened frame IN BETWEEN two frames!\n\nThis can be useful for slow, time-consuming movements (a walk cycle), or to just give you a head-start in a new frame. See the below image to understand.

cameraRotation=Camera rotation

enableCameraWobble=Enable camera wobble
intensity=Intensity
speed=Speed

addTweenedFrame=Add tweened frame\n({0})
tweenedFrameErrorTitle=Can’t Add Tweened Frame
tweenedFrameErrorInfo=Tweened frames can only be added BETWEEN two frames.\n\nSee the “?” button to see the instructions for adding tweened frames.
tweenedFrameBar=(Tap bar image below to change which frames are added.)

deleteOneSegment=Delete one segment
deleteSegmentAndChildren=Delete segment and children

glow=Glow
clearAllFilters=Clear all filters
copyFilters=Copy filters
pasteFilters=Paste filters

videoOfChanges=Video of changes

copySound=Copy sound
pasteSound=Paste sound

tweenStickfigureColors=Tween stickfigure colors
tweenStickfigure=Tween stickfigure
stickfigureTweenInfo=Tweening options only apply if the animation has tweening enabled.

leavingAppInfoUpdated=You clicked a button that will take you out of the app.\n\nIt is highly recommended you make sure your project is SAVED first, as the app may restart upon returning!\n\nAre you sure you want to leave the app?

startFrame=Start frame:
endFrame=End frame:
startEndFramesWrong=The start frame cannot be larger than the end frame!

polyfill=Polyfill
polyfillInfoTitle=About Polyfills
polyfillInfoInfo=The anchor of the polyfill contains the layering and polyfill color properties.\n\nEach polynode in the polyfill counts for one node in the max node limit of the stickfigure.\n\n- – – The following is important! – – -\n\nTo avoid “weird” polyfills, make sure you add nodes in either a clockwise or counter-clockwise order – pick a direction and stick with it. Just adding nodes randomly all over will result in a weird shape.

polyfillError1Title=Polyfill Not Created
polyfillError1Info=A polyfill needs at least three nodes to become visible!
polyfillError2Title=Can’t Begin Polyfill
polyfillError2Info=The node you selected is already the anchor to a polyfill.\n\nA node can only be the anchor to one polyfill at a time.
polyfillError3Title=Polynode Not Added
polyfillError3Info=The node you selected is already a polynode in this polyfill!

polyfillTools=Polyfill Tools
polyfillToolsInfo=A polyfill is always drawn right before its anchor node. Push/pull that node back/forward to adjust the draw order of the polyfill.

polyfillCreationTools=Polyfill Creation Tools
polyfillCreationToolsInfo=A polyfill needs at least 3 nodes to become visible. The first node in a polyfill becomes the anchor.
polyfillCreationToolsInfoHowToEnd=To apply and end a polyfill, click the anchor node again.

polynodeCount=Polynode count
usePolyfillColor=Use polyfill color
editPolyfill=Edit polyfill
removeLastPolynode=Remove last polynode
deletePolyfill=Delete polyfill

nodes=Nodes

exportAntiAliasingCheckbox=Check this box to enable anti-aliasing (smoother lines).
exportProgressWarning=If the app crashes while exporting, you are likely very near the memory limit of your device. Either export at a lower width/height, or use the percentage slider at the bottom of the “Open project” window next time.

openPercentageFrom=Open with this percentage starting from…
theFirstFrame=The first frame
theLastFrame=The last frame

stickfigureLimitWarningInfoNew=This frame currently contains the maximum number of stickfigures ({0}) or the maximum number of nodes ({1}). Sorry about that, mobile device restrictions.

isOpeningMemoryIOS=Below is the current memory usage of Stick Nodes. A crash may occur if memory usage gets too high, please keep projects “small” to be safe!\n\nIf a crash occurs when opening, next time scroll down in the “Open project” window and change the percentage to load.
isOpeningMemoryAndroid=Below is the current memory usage of Stick Nodes and the estimated memory limit. A crash may occur if memory usage gets too high, please keep projects “small” to be safe!\n\nIf a crash occurs when opening, next time scroll down in the “Open project” window and change the percentage to load.
appSettingsInfo2IOS=Below is the current memory usage of Stick Nodes. A crash may occur if memory usage gets too high, please keep projects “small” to be safe!
appSettingsInfo2Android=Below is the current memory usage of Stick Nodes and the estimated memory limit. A crash may occur if memory usage gets too high, please keep projects “small” to be safe!

errorImportMultipleSoundsInfo1=Some sounds were successfully imported, but Stick Nodes ran into an error while importing the following sound files.\n\nMake sure each file is an MP3 file that is LESS THAN 256kb in size and is not already imported into this project.
errorImportMultipleSoundsInfo2=Sorry, Stick Nodes ran into an error while importing all sound files.\n\nMake sure each file is an MP3 file that is LESS THAN 256kb in size and is not already imported into this project.

errorImportMultipleStickfiguresInfo1=Some stickfigures were successfully imported, but Stick Nodes ran into an error while importing the following stickfigure files.\n\nMake sure your Stick Nodes app is up to date. and if these are Pivot STK files, remember Stick Nodes can only accept Pivot STK files made with Pivot 2.2.7 or lower.
errorImportMultipleStickfiguresInfo2=Sorry, Stick Nodes ran into an error while importing all stickfigure files.\n\nMake sure your Stick Nodes app is up to date. and if these are Pivot STK files, remember Stick Nodes can only accept Pivot STK files made with Pivot 2.2.7 or lower.

previewSoundTitle=Sound Preview
previewSoundInfo=Preview this sound before you import it.
stopSound=Stop sound

previewStickfigureTitle=Stickfigure Preview

selectMultiple=You can select multiple files in the list below.
clearSelection=Clear selection

pack=Pack
submitPack=Submit pack

submitInfo3=If you select more than one stickfigure here, it will be assumed to be part of a pack. DO NOT submit multiple UNRELATED stickfigures in one submission if they’re not meant to be a pack.
submitError3=Make sure you selected at least one stickfigure, and all text fields are filled.
errorSubmittingInfo3=Sorry, but there was a problem submitting the stickfigure. If you selected multiple files, try sending just one.

exportAntiAliasingCheckbox2=Only available if exporting at 720p or higher.

flipStickfigureX=Flip stickfigure X
flipStickfigureY=Flip stickfigure Y
flipSegmentX=Flip segment X
flipSegmentY=Flip segment Y

textfieldRotation=Textfield rotation

getProMessage=It seems you like Stick Nodes, did you know there’s a Pro version?\n\nThe Pro version allows you to add sounds to your animation and export your animation as a video (to upload to Youtube)! Also, you can apply filters to stickfigures! (Blur, glow, tint, transparency, and more!)\n\nIt is highly recommended 😀

autoCameraToolTitle1=Use auto-camera to have this frame’s camera tween across multiple frames automatically.
autoCameraToolTitle2=This camera is already part of another frame’s auto-camera settings.\nAs a result, moving this camera manually is locked and disabled.
autoCameraButton=Auto-camera…

autoCameraTitle=Auto-Camera Settings
deleteAutoCamera=Delete auto-camera
deleteAutoCameraInfo=This will remove this auto-camera you have set up.\nThe camera will no longer automatically move and adjust as you add/remove frames.
autoCameraEndFrame=On what frame does the auto-camera end?\n(This must be a frame number after the current frame.)
easeIn=Ease in
easeOut=Ease out

whatIsAutoCamera=What is auto-camera?
autoCameraDesc=Auto-camera helps easily add a nice cinematic effect to your animations by automatically moving/zooming/rotating the camera from a start frame to an end frame you specify.\n\nSlightly moving the camera each frame manually can be tough, this does is automatically for you, in a smooth and consistent manner.\n\nAll frames in between this frame and the frame number you enter above will automatically manage the movement of the camera, and will adapt if you add/delete frames.\n\nIt’s basically a tween for the camera that spans multiple frames, not just one.

autoCameraErrorTitle=Auto-Camera Error
autoCameraError1=Please set an end frame.
autoCameraError2=The frame where the auto-camera ends needs to be after the current frame.
autoCameraError3=The end frame doesn’t exist.
autoCameraError4=The auto-camera couldn’t be applied from frame {0} to {1} because one of the frames in-between is already applying an auto-camera.
autoCameraError5=Can’t do auto-camera if this is the last frame.

selectStickfigureJoin=Which node should this stickfigure be joined to?
selectStickfigureCameraLock=Which stickfigure do you want to lock to the camera?

selectStickfigure=Select Stickfigure
selectStickfigureInfo=Touch blank area to cancel.

cannotLockToCameraErrorTitle=Can’t Lock To Camera
cannotLockToCameraErrorInfo1=This stickfigure is already locked to the camera.
cannotLockToCameraErrorInfo2=This stickfigure is joined to another stickfigure.

cantJoinInfo2=Can’t join this stickfigure, it is locked to the camera.

cameraStickfigureLockInfo=Use this to lock stickfigures to move with this camera.
lockStickfigureToCamera=Lock stickfigure to camera…

lockStickfigureToCameraTitle=Lock Stickfigure To Camera
lockStickfigureToCameraInfo1=When you lock a stickfigure to the camera, the stickfigure is no longer manually moveable – it will move with the camera.\n\nThis can be useful for things like a stationary healthbar, a logo – things like that. Note, you can’t lock joined stickfigures to the camera – unjoin them first.\n\nAlso, be careful with the “rotate” checkbox – normally you would want something like a logo to stay with the camera and rotate with it, but not a background.
chooseStickfigureToLock=Choose stickfigure to lock…
currentlyLockedStickfigures=Currently locked stickfigures
parallaxTitle=What is parallax?
parallaxInfo=A more advanced feature is the “parallax” effect you can create with background and foreground objects.\n\nBy changing the parallax ratio, the stickfigure will not move *exactly* with the camera – instead, the stickfigure will move slower/faster than the camera. Play around with the values to get realistic depth from background stickfigures.\n\nParallax 1.0 = Stickfigure moves exactly with camera\nParallax 0.1 = Stickfigure barely moves with camera\nParallax -0.1 = Stickfigure barely moves opposite of camera\nParallax -1.0 = Stickfigure moves exactly opposite of camera\n\nThe most common use of parallax is to make background and foreground objects look far/close.\n\nParallax 0.1 = Background near camera\nParallax 0.9 = Background far from camera\nParallax -0.1 = Foreground far from camera\nParallax -0.9 = Foreground near camera

parallax=Parallax
unlock=Unlock
rotateAndScaleWithCamera=Rotate and scale with camera?

copiedColors=Copied colors

modifyBranchButton=Modify branch…
modifyBranchInfo=Use this to quickly modify this node’s properties, and the properties of all of it’s children.\n\n(Select the main node to modify the entire stickfigure.)

modifyNodeBranchTitle=Modify Node Branch
modifyBranchInfo=Use these options to quickly modify the selected node and all of it’s children at the same time.
replace=Replace
replaceColor=Replace color
segmentColor=Segment color
gradientColor=Gradient color
incrementLength=Increment length
incrementScale=Increment scale
incrementThickness=Increment thickness
ignoreZeroes=Ignore 0s
setSegmentScale=Set segment scale
setSegmentThickness=Set segment thickness
sendBranchToBack=Send ENTIRE branch to back
sendBranchToFront=Send ENTIRE branch to front
from=From
to=To
setTo=Set to
set=Set

lagTitle=Lag Problems?
cullingInfo=Culling tells the app to ignore drawing nodes outside of view.\n\nThis might improve your performance in the app, but it could also result in weird rendering. Anything that looks weird with culling enabled will only be visible in-app, not when exporting.
enableCulling=Culling on?
cullingOff=Culling: Off
cullingOn=Culling: On

memoryUse=Memory use

packSubmissionLimitTitle=Limit Reached
packSubmissionLimitInfo=Please keep pack submissions short and concise.\n\nMore than 20-30 stickfigures is excessive and to someone downloading this pack – it can be too much to understand and too messy to keep organized.

textfieldShadow=Textfield shadow

more=More
less=Less

expLag1=Experiencing lag?
expLag2=Sounds may go out of sync if lagging. Exported animations will not lag, so you have to consider that when watching your animation here.\nTemporarily disable filters and tweening to get better performance.

backupTitle=Reminder to Backup Your Files!
backupInfo=This is just a friendly reminder to backup your files often!\n\nMaybe you lose your device one day, or even just accidentally delete your Stick Nodes files – if you have no backups, they are gone forever!\n\nIt is recommended to take the time to use the “Send Files” button to quickly email yourself some of your projects and stickfigures – that way if you ever lose your files, at least they will be in your email – ready to download!
backupInfo2=Also, an important note for Android users – be very careful of “space-making” apps that delete “junk” files to make room on your device!\n\nTHEY MAY WRONGFULLY DELETE STICK NODES FILES.\n\nI recommend never to use such apps unless the app allows you to pick and choose what is deleted.

storageTitle=Access to Storage
storageInfo=Please give Stick Nodes access to device storage.\n\nThis is important or else the app will not be able to save projects, export animations, or import stickfigures!\n\nIf you have denied access to storage and want to change that decision, you can do one of the following:\n\n1) Go to Settings > Apps > Stick Nodes (Pro) > and enable “storage” permission\n\n2) Uninstall the app, and reinstall

default=Default

statusFinishing=Finishing
statusOldProject=Old project
statusOldMethod=Old method

statusOpening1=Opening project
statusOpening2=Reading project data
statusOpening3=Reading background image
statusOpening4=Rebuilding stickfigure library ({0} of {1})
statusOpening5=Loading sound files ({0} of {1})
statusOpening6=Reading frame data ({0} of {1})
statusOpening7=Rebuilding auto-camera frames
statusOpening8=Rebuilding textfields

statusSaving1=Saving project
statusSaving2=Saving project data
statusSaving3=Saving background image
statusSaving4=Saving stickfigure library ({0} of {1})
statusSaving5=Saving sound files ({0} of {1})
statusSaving6=Saving frame data ({0} of {1})
statusSaving7=Saving auto-camera frames

statusAudio1=Preparing to encode audio
statusAudio2=Applying audio silence from frame {0}
statusAudio3=Applying sound {0} onto frame {1}

statusRendering1=Preparing to render frames
statusRendering2=Rendering frames ({0} of {1})

statusExporting1=Starting GIF export
statusExporting2=Starting MP4 export
statusExporting3=Cancelling export
statusExporting4=Finishing export
statusExporting5=Combining video and audio files into one

scaleJoinedStickfigures=Scale joined stickfigures

filterQualityTitle=Quality (High = Lag)
low=Low
medium=Medium
high=High

submitDescriptionOptional=Optional, but you should
optional=Optional

lagDialogInfo=Use the following options to decrease lag in the app.\nLag is closely related to the amount of nodes and/or filters on the screen.
lagDialogOption1=Do not draw nodes out of view
lagDialogOption1Description=The app will calculate which nodes are out of view and won’t draw them. This may produce weird results, but it’s only temporary and won’t be exported like that.
lagDialogOption2=Do not draw onion skin when moving stage
lagDialogOption2Description=When moving or zooming the stage, the onion skin will temporarily go away to make the movement smoother.
lagDialogOption3=Do not draw filters when dragging
lagDialogOption3Description=When dragging a stickfigure or the stage, filters will temporarily shut off to improve performance.

splashScreen1PrivPol=Tap here for Privacy Policy.

quickMenu=Quick Menu

lockNode=Lock node

tooltipQuickMenu=Disable the Quick Menu in settings,\nunder “App Tools”

creationSmartStretchTitle=Testing Smart-Stretch
creationSmartStretchInfo=Move smart-stretch segments to see how they work. Press “Cancel” when you’re done.

settingsQuickMenuTitle=Show Quick Menu on stage?

smartStretchWindowTitle=What is Smart-Stretch?
smartStretchWindowInfo=Smart-stretch allows you to stretch complex limbs of stickfigures and have all children nodes properly stretch along (length and angles change to simulate stretching).\n\n1) Smart-stretch can only be used on a stretchy, non-static node\n\n2) It will only affect children nodes that are static\n\n3) Smart-stretch can only be turned on/off in Creation Mode\n\n4) To test smart-stretch in Creation Mode, you’ll need to specifically press the \”Test smart-stretch\” button prior to moving the limbs around or else the limb will only act as a normal stretchy node.\n\nSee the below image to understand what smart-stretch is.

smartStretchMenu=Smart-stretch?
smartStretchTestButton=Test smart-stretch

finishPolyfill=Finish polyfill

chooseGIFPNGTitle=Choose GIF or PNG
chooseGIFPNGInfo=Choose to export as an animated GIF, or a NON-animated series of PNG images (it is not a good idea to export a large animation as PNG frames, that’s a lot of image files).\n\nExporting as PNG is useful if you want a high quality image. Also, the background can be transparent.
chooseGIFPNGInfoGIF=Export an animated GIF of your project
chooseGIFPNGInfoPNG=Export project as single PNG images, higher quality than GIF

pngExportTitle=Export Animation As PNG Frames
pngExportInfo1=This will export your animation as single PNG images. This is NOT ANIMATED.\n\nIt is useful if you want to export a single frame in high quality, or if you want to export a series of frames as individual images.
imageName=Image name
pngExportInfo2=Your file(s) will be called NAME_0001.png, NAME_0002.png…If a file with the same name is encountered, it will be deleted.
pngExportTransparentBG=Check this box to have a transparent background
pngExportImages=Export PNG images

doNotSmartStretch=Do not smart-stretch

backgroundQualityTitle=Choose Image Quality
backgroundQualityInfo=Stick Nodes will load the selected image and shrink it down to save memory. Less shrinking means better quality (especially when zooming in).\n\nBe careful, higher quality may be unnecessary and it will greatly increase your project file size, memory usage, and saving time.
normal=Normal
high=High
veryHigh=Very high

shapeTools=Shape Tools
shapeType=Shape type
ellipse=Ellipse
trapezoid=Trapezoid
polygon=Polygon
changeShapeProperties=Change the currently-selected shape and it’s properties.
noProperties=No properties
isHalfArc=Is half arc
useOutlineColor=Circle outline color
isRightTriangle=Is right triangle
flipped=Flipped
topRatio=Top ratio
vertices=Vertices

pngEncoderFailTitle=PNG Encoder Failed To Start
pngEncoderFailInfo=Sorry, but Stick Nodes ran into an error when starting the encoder.

interpolationEase=Ease
interpolationBounce=Bounce
interpolationElastic=Elastic
interpolationSwing=Swing

pasteAngleInfo=Checked box will paste the segment and preserve its visual angle.
errorOpeningInfo2OOME=Sorry, Stick Nodes ran into an error while opening this project.\n\nYOUR DEVICE RAN OUT OF AVAILABLE MEMORY SPACE.\n\nThis means the project has too much data to open properly.\n\n- – – – – – – – – -\n\nYour best option is to open it again, but in the “Open Project” window, scroll down and change the percentage to “50% from the FIRST frame”. Once that opens, re-save it as the “first half”.\n\nThen, go back to the “Open Project” window and open the project again, but first change the percentage to “50% from the LAST frame” and save that as the “second half”.\n\nThis process will split your one large project into two smaller projects.\n\n- – – – – – – – – -\n\nTry to keep complex stickfigures usage down and not use so many frames per project to prevent this in the future.

copyAllProperties=Copy all properties
pasteAllProperties=Paste all properites

useSkinSetting=Use custom skin file (if it exists)

nodesAndLagTitle=About Nodes and Lag
nodesAndLagInfo=Some advice – the more nodes a stickfigure uses, the more lag it may produce for you and others.\n\nAs a result, it’s a good idea to be smart about how you use nodes. Just because the node limit is {0} does not mean you should aim to use that many.\n\nFor example, if you’re filling in a large area, use a few thick nodes rather than many smaller ones – or use a polyfill.

skinAppResetTitle=Skin Changed, App Will Restart
skinAppResetInfo=You have selected a new skin setting. In order to apply this setting, the app has to restart.\n\nYOU WILL LOSE ANY UNSAVED CHANGES.\n\nPlease make sure your project is saved before proceeding.

pasteStickfigurePropertiesTitle=Paste Stickfigure Properties
pasteStickfigurePropertiesInfo=Properties copied from:\n{0}\n\nSelect which properties you want to paste.
position=Position
stickfigureRotation=Stickfigure rotation
stickfigureFilters2=Stickfigure filters
layering=Layering
nodeProperties=Node properties
pastePositionInfo=Copies the main node position to this stickfigure
pasteScaleInfo=Copies the scale to this stickfigure
pasteColorInfo=Copies the color to this stickfigure
pasteRotationInfo=Copies the rotation to this stickfigure
pasteFiltersInfo=Copies all filters to this stickfigure
pasteLayeringInfo=Tries to copy the layering position in the frame to this stickfigure
pasteNodePropertiesInfo=Copies all node positions, colors, and settings to each node in this stickfigure – only possible if both are the same type of stickfigure

packRenameTitle=Clean Up File Names
packRenameInfo1=Names that are organized and make sense help users to better find and use your stickfigures. Please make sure all file names below are good.
packRenameInfo2=A pack full of messy-named files will NOT be approved regardless of how good the stickfigures are.
bad=Bad
good=Good

colorPickerRefresh=Use the refresh button above to update the color picker cache

copyAbove=Copy above

useLeftHandModeSetting=Use left-hand mode
leftHandModeResetTitle=Mode Changed, App Will Restart
leftHandModeResetInfo=You have selected a new mode setting. In order to apply this setting, the app has to restart.\n\nYOU WILL LOSE ANY UNSAVED CHANGES.\n\nPlease make sure your project is saved before proceeding.

mcToolsTitle=Movieclip Tools
newMC=New movieclip
whatAreMCs=What are movieclips?
addMCToLibraryButton=Add movieclip to library
finishedEditing=Finished editing
saveMCAs=Save movieclip as

mcLibraryToolsTitle=Movieclip\nLibrary Tools
copyMC=Copy movieclip
pasteMC=Paste movieclip
importMC=Import a movieclip
addMC=Add movieclip
editMC=Edit movieclip
createNewMC=Create new movieclip
downloadMCs=Download movieclips
submitMC=Submit movieclip

addMCToLibraryTitle=Add Movieclip To Library
addMCToLibraryInstructions=Give a unique name to this movieclip.
movieclipEmptyName=Come on, this movieclip deserves a name, go and give it one.
addMCToLibraryInfo=This will add this movieclip to your current project so you can use it.\n\nYou will be able to edit it further with the “Edit movieclip” button under “Movieclip Library Tools”.
movieclipName=Movieclip name

cancelMCCreateInfo=If you didn’t save this movieclip or add it to the library, you will lose all edits and modifications you just made.

editDuplicateMCTitle=Edit Movieclip or Duplicate Movieclip?
editDuplicateInfo=Do you want to edit this movieclip, or duplicate it (create a new movieclip) and edit that?
edit=Edit
duplicate=Duplicate
editDuplicateEditInfo=Editing this movieclip will also modify every existing instance of this movieclip as it appears in your project.
editDuplicateDuplicateInfo=Duplicating this movieclip creates a completely new version of it, nothing in your project will be modified.

editingMCTitle=Editing a Movieclip
editingMCInfo=Any changes you make here are final and will change this movieclip as it appears in all frames across your project.\n\n(There is no “cancel” button to undo everything, only the undo/redo buttons which work up to a limit.)

importMCTitle=Import Movieclip
importMCInfo=Please choose a movieclip file to import. Listed below are all of the movieclips found in the Stick Nodes folder on your device.

mcSaveAsTitle=Save Movieclip As
mcSaveAsInfo=This will save your movieclip to a file in the Stick Nodes folder so you can import it into other projects or even share it with others.\n\nNote that this will not add the movieclip to your current project, to do that use the “Add to library” button.
saveMC=Save movieclip

isImportingMCTitle=Importing Movieclip…
isImportingMCInfo=Movieclip is importing. Please wait until this dialog goes away. Movieclips are like mini-projects, so they may take a while to import. Be careful of memory usage!
isImportingMCWarning1=DO NOT LEAVE THE APP OR THE MOVIECLIP MAY NOT IMPORT PROPERLY!
isImportingMCWarning2=(Don’t go to the home screen or switch apps.)\n\nThis may take a few seconds, depending on your movieclip size and device power.
isImportingMCMemory=Below is the current memory usage of Stick Nodes. A crash may occur if memory usage gets too high, please keep movieclips “small” to be safe!

isSavingMCTitle=Saving Movieclip…
isSavingMCInfo=The movieclip is saving to a file. Please wait until this dialog goes away. Movieclips are like mini-projects, so they may take a while to save.
isSavingMCWarning1=DO NOT LEAVE THE APP OR YOUR MOVIECLIP MAY NOT SAVE PROPERLY AND YOU WILL LOSE ALL OF YOUR PROGRESS!
isSavingMCWarning2=(Don’t go to the home screen or switch apps.)\n\nThis may take a few seconds or minutes, depending on your project size and device power.

stickfigureLimitWarningInfoNew2=This frame currently contains the maximum number of nodes ({0}). Sorry about that, mobile device restrictions.
frameLimitWarningTitle=Can’t Add Frame
frameLimitWarningInfo=Movieclips are meant to be simple mini-animations – to conserve memory, there is a limit to the number of frames they may contain ({0}) and the amount of nodes per movieclip ({1}).

mcImportedTitle=Movieclip Successfully Imported
mcImportedInfo=You can add see it in the dropdown list for imported movieclips.
mcImportMissingSoundsProOnly=Stick Nodes has detected that you’re trying to import a movieclip that contains sounds.\n\nSince sounds are a Pro-only feature, they had to be removed upon importing this movieclip, sorry about that.
mcImportMissingSounds1=When importing this movieclip, Stick Nodes couldn’t find some sound files that were referenced!\n\nPlease remember, sound files are not stored in a Stick Nodes movieclip. As a result, if you move, rename, or delete one of these sounds from your device, it will also be removed from your Stick Nodes animation.\n\nThe following sound file(s) were missing from your device:
mcImportedMissingSounds2=If you replace the missing sound file(s), you can close (do not save!) and re-import this movieclip and Stick Nodes should correctly find them next time.

errorImportingMCTitle=Error Importing Movieclip
errorImportingInfo1MC=Sorry, Stick Nodes ran into an error while importing this movieclip.\n\nIf you believe this file is a valid NODEMC file, PLEASE MAKE SURE YOUR STICK NODES APP IS UP TO DATE and try again.
errorImportingInfo3MC=Sorry, but Stick Nodes can’t import any movieclips because no external storage is detected.\n\nPossible solutions include either inserting an SD card or safely disconnecting your device from a computer and trying again.

errorSavingMCTitle=Error Saving Movieclip

mcAnimationInfo=Changing FPS/tweening here is only for testing your movieclip. Your movieclip may be used in a project with a low/high FPS, or with/without tweening.

statusImportingMC1=Importing movieclip
statusImportingMC2=Reading movieclip data
statusImportingMC3=Importing required stickfigures ({0} of {1})
statusImportingMC4=Importing required sounds ({0} of {1})
statusImportingMC5=Reading frame data ({0} of {1})

statusSavingMC1=Saving movieclip
statusSavingMC2=Saving movieclip data
statusSavingMC3=Rendering movieclip preview
statusSavingMC4=Saving stickfigure library ({0} of {1})
statusSavingMC5=Saving sound files ({0} of {1})
statusSavingMC6=Saving frame data ({0} of {1})

statusAudio4=Processing {0} sound events on frame {1}

saveStickfigureNew=Save stickfigure as
libraryToolsNew=Stickfigure\nLibrary Tools
frames=Frames

cantJoinTitleFix=Can’t Join Figures
cantJoinInfo2Fix=Can’t join this figure, it is locked to the camera.
previousFigure=Select previous figure
nextFigure=Select next figure

addMovieclipAsTitle=Add Movieclip As…
addMovieclipAsInfo=A movieclip can be animated (looped or play-once) or it can be used as a single-frame “graphic” which only displays 1 frame (selected by you).\n\nYou can’t change a movieclip’s type once it’s added to the stage.
animated=Animated
singleFrame=Single-frame

movieclipPreviewTitle=Movieclip Preview
movieclipPreviewInfo=Below is a preview of the center area of this movieclip.
movieclipPreviewStats=\nFrame count: {0}\nStickfigures: {1}\nSounds: {2}
noneLowercase=none

aboutMovieclipsTitle=About Movieclips
aboutMovieclipsInfo=Movieclips are small mini-animations you can place into your project. Once placed, they will take care of animating and looping themselves – typical use is as background objects.\n\nSome examples where a movieclip may come in handy include a walk cycle, a looping fire animation, a background waterfall, flashing lights, auras, “action lines” (to show speed), and obviously so much more. All you have to do is animate the action once, and the movieclip will handle playing it over and over again.\n\nMovieclips can also be saved to a file and imported into other projects, like stickfigures.\n\nMovieclips can also be used in other ways and have more benfits, see the video linked below to get more information.
aboutMovieclipsButton=See video

movieclipTools=Movieclip Tools
deleteMC=Delete movieclip
breakApartMC=Break apart movieclip
flipMCX=Flip\nmovieclip X
flipMCY=Flip\nmovieclip Y
centerMC=Center movieclip
mcScale=Movieclip scale
rotateMC=Rotate movieclip
lockMC=Lock movieclip movement
keepMCDuringTween=Keep movieclip during tween
joinMC=Join movieclip to…
unjoinMC=Unjoin movieclip
startFrame2=Start frame
currentFrame=Current frame
playDuringDelay=Play during delay
loop=Loop
once=Once
graphic=Graphic
mcSoundVolume=Movieclip volume

movieclipFilters=Movieclip Filters

isOriginYes=Is origin: Yes
isOriginNo=Is origin: No
originFrame=Origin is on frame: {0}

statusOpening4_2=Rebuilding movieclip library ({0} of {1})
statusSaving4_2=Saving movieclip library ({0} of {1})

copyContextInfoNew=Choose how many frames to copy – this one, plus how many after it? Try not to copy TOO many frames, they eat up memory fast.
copyContextFrames=This will copy from this frame up to and including frame {0}

viewOptions=View options
showOnlyMainNodes=Show only main nodes
showFigureIDs=Show figure IDs
onionSkinLagWarning=More onion skin = more lag!
numPrevOnionSkinFrames=Onion skin previous frames
numNextOnionSkinFrames=Onion skin next frames

upsideDown=Upside down

traceMenu2=Load a stickfigure or frame to be the background, and trace over the top of it.
traceFrame=Trace frame…
breakApartMCErrorTitle=Can’t Break Apart Movieclip
breakApartMCErrorInfo=The selected movieclip (on its current frame) cannot be broken apart on this frame, it would result in this frame containing too many nodes, over the maximum limit.

traceFrameTitle=Select a Frame To Trace
traceFrameInfo=Select a frame (1 -> {0}) to be used as the background reference.

failedToPasteFramesTitle=Failed To Paste Frames
failedToPasteFramesInfo=Can’t paste the copied frames, adding these frames would surpass the total node limit ({0}) or total frame limit ({1}) of the movieclip.

blurExportQuality=Make blur filter lower quality to appear more blurred?

lagDialogOption4=Only render every third thumbnail
lagDialogOption4Description=When scrolling through the frame thumbnails, the app will temporarily only render every third frame to reduce lag.

previous=Previous
next=Next

cancelKeepChanges=Cancel and keep changes

figuresJoinedToNode=Figures joined to this node

deleteHideTitle=Hide, Delete, or Rename Imported Figures
belowImportedStickfigures=Below is a list of all imported stickfigures, here you can hide or delete them from the project.
belowImportedMCs=Below is a list of all imported movieclips, here you can hide or delete them from the project.
deleteHideInfo=A common reason for HIDING a figure from the import list is for organization, for example, to unlist figures not used frequently. This allows you to navigate around easier.\n\nDeleting, however, is more extreme. The figure will be permanently removed (cannot be undone) from all frames in the project. Deleting unused stickfigures and ESPECIALLY UNUSED MOVIECLIPS can potentially free up a lot of memory.
calculateUseCounts=Calculate use counts

name=Name
nodeCount=Node count
frameCount=Frame count
foundOnFrames=Found on these frames
notFoundOnFrames=Not found on any project frames
usedInMCs=Used in these movieclips
notUsedInMCs=Not used in any movieclips
aboutToDeleteFromProject=You’re about to delete a figure from this project.\nThis is PERMANENT and cannot be undone.
safeDelete=Is safe to delete!
notSafeDelete=Is NOT safe to delete!
areYouSureDelete=Are you sure you want to delete this figure from the project?
mcDeleteNotice=Please note, deleting a movieclip WILL NOT delete the stickfigures and sounds that were imported along with it. You will have to delete those separately, as they may be used somewhere else in the project.
yesDelete=Yes, delete permanently

permaDeleteMCInfo=You are about to delete movieclip file(s) from your device. You cannot undo this and you will not be able to replace this file(s) unless you have it saved somewhere else.\n\nNote: Any projects that already use this movieclip will be UNAFFECTED, this will only prevent you from being able to import this movieclip in future projects.

hideImportedTitle=Hide Imported Stickfigures?
hideImportedInfo=When importing a movieclip, all of the stickfigures that are used inside of the movieclip are also imported.\n\nUnfortunately, this can quickly clutter up the import list with many stickfigure files.\n\nYou can edit the import list and HIDE stickfigures to clean it up later, or you can choose to import this movieclip and automatically HIDE all stickfigures it will import now.
importAndHide=Import and HIDE
importAndDoNotHide=Import and DO NOT HIDE

editingMC=Editing Movieclip
mcSubmissionSoon=Movieclip submissions and downloads coming soon!

tweenLoopProtection=Tween loop protection
tweenLoopProtectionTitle=What is Tween Loop Protection?
tweenLoopProtectionInfo1=Tween Loop Protection is only necessary if you have a looping animation that doesn’t loop properly from the last frame back to the first frame, when tweening is enabled.
tweenLoopProtectionInfo2=In the 4-frame animation above, stickfigure A is being animated off the stage to the right, and stickfigure B slides in to replace it at the end of the animation. It is meant to loop and continue over and over.\n\nIf this animation were to play with tweening enabled, frame 4 would tween into frame 1, and as a result stickfigures A and B would tween left back into their frame 1 positions.\n\nThis is an undesired result and would kill the looping effect. This is where Tween Loop Protection helps.\n\nAfter enabling Tween Loop Protection, during playback, frame 3 will tween into frame 4 like normal – but then, frame 4 will be skipped and the animation will jump to frame 1. This isn’t noticeable, since frame 1 and frame 4 look the same. This will solve the looping issue.\n\nIT IS VERY IMPORTANT THAT FRAME 1 AND THE LAST FRAME (ABOVE, FRAME 4) ARE VISUALLY IDENTICAL FOR THIS TO WORK PROPERLY.\n\nTry playing a simple looping animation and toggling Tween Loop Protection on/off to see the effect. (Note, you may not actually need Tween Loop Protection for every loop.)\n\nWhen Tween Loop Protection is enabled on a movieclip, the last frame will never be selectable or visible. It’s almost like it doesn’t exist, its only purpose is so the second-to-last frame can tween into it properly.

hiDoNotTranslateThis=Please keep the translations for the below phrases as short as you can, no longer than the English version if possible. Abbreviate if you need, or even drop the word “tools”. Thanks yo
quickAppTools=App Tools
quickProjectTools=Project Tools
quickAnimationTools=Animation Tools
quickStickfigureLibraryTools=Stickfigure Library
quickMCLibraryTools=Movieclip Library
quickTextfieldTools=Textfield Tools
quickCreationModeTools=Creation Mode Tools
quickMovieclipTools=Movieclip Tools
quickMovieclipFilters=Movieclip Filters
quickStickfigureTools=Stickfigure Tools
quickStickfigureFilters=Stickfigure Filters
quickSegmentTools=Segment Tools
quickSpecialSegmentTools=Special Segment Tools
quickShapeTools=Shape Tools
quickPolyfillTools=Polyfill Tools
quickCameraTools=Camera Tools
quickFrameTools=Frame Tools

score=Score
best=Best

mcLimitsInfo=Movieclips are limited to {0} frames or {1} total nodes
autoCameraToolTitle2Fix=Auto-camera start frame: {0}\nThis camera is already part of another frame’s auto-camera settings.\nAs a result, moving this camera manually is locked and disabled.

renameFigureTitle=Rename Figure
renameTo=Rename this figure to
rename=Rename
pleaseName=Please enter a new name

pixelNudge=Nudge amount
hueShift=Hue shift

exportWidthHeightExtra=Recommended: 1280×720
segmentLength=Segment length
sd=SD
hd=HD

neighborNodes=Show neighbor nodes
showZoomButtons=Show zoom buttons

drawAboveWidescreenBars=Draw above widescreen bars
lockTextfield=Lock textfield movement
lockTextfieldToCamera=Lock textfield to camera

international=International
newLanguageTitle=New Language!
addInbetweenFrames=Add a specific number of tweened frames between this and the next frame.

pasteAngleInfoNew=Paste the segment at the same visual angle at which it was copied?
pasteAngleLabel=Preserve visual angle

copyWithJoinedFiguresInfo=Do you want to copy this stickfigure and all of its joined figures?
copyWithJoinedFigures=Copy with joined figures

pasteInIndexInfo=The app will attempt to paste the copied figure in the same layering from the frame in which it was copied
pasteInIndexLabel=Paste with layering

deleteStickfigureAndJoins=Delete stickfigure and all joined

settings=Settings
moveCameraDuringDelay=Move camera during delay?
moveCameraDuringDelayInfo=During the delay, the camera will pan and move into the next frame.\n(This disables tweening on this particular frame.)\n\nExample usage: Useful for displaying a camera-locked textfield while the camera pans across the scene for a few seconds, for a cinematic look.\n\nSelect the type of easing to use below.

wobbleXY=Wobble camera XY
wobbleRotation=Wobble camera rotation
wobbleSpeed=Wobble speed
wobbleScale=Scale wobble with zoom
copyWobble=Copy wobble
pasteWobble=Paste wobble

copyStickfigureLockData=Copy all lock data
pasteStickfigureLockData=Paste all lock data

viewOptionsMovedInfo=The controls for guides, magnifier, and arrows have moved to the “View Options” menu at the top-right of the screen.

slowMotionLabel=Slow Motion Tweening\nThis will override the number of tweened frames for this one frame

figureIsJoined=This figure is joined
useJoinParentFilters=Use join-parent filters instead

showFiltersMoreInfo=Instead of hiding all filters, you can disable only blur/glow if you desire. Blur/glow are the most CPU-intense, disabling them will help with lag.
showBlur=Show blur
showGlow=Show glow

soundPan=Sound pan
soundPitch=Sound pitch
clearSound=Clear sound
fadeIn=Fade in\n(seconds)
fadeOut=Fade out\n(seconds)

lineWidth=Line width
lineWidthInfo=See nodes and lines easier
thin=Thin
thick=Thick

character=Character
restart=Restart?
no=No
yes=Yes
error=Error
clear=Clear

description=Description
hashtags=Hashtags
submitDescriptionInfo=Include a description or instructions.\nUse relevant keywords so people find\nyour submission when searching!\nProtip: Write your description in the next email\nscreen, not here, so you can use autocorrect.
packRenameInfo4=Your filenames should be alphabetical, neat, and simple, with no unnecessary symbols or numbers.
packRenameGoodText=Alphabetical\nSimple\nGood!
packRenameBadText=Hard to read\nDenied!

submitWhichTitle=What Are You Submitting?
submitWhichInfo=Submit your creations to the StickNodes.com website! There are over 30,000 user-created stickfigures, updated daily!
submitWhichStickfigures=Submit a single stickfigure, or a pack of stickfigures.
submitWhichMovieclips=Movieclip submissions coming soon!

submissionRule1Title=Rule Number One
submissionRule1Info1=Did you make it?
submissionRule1Info2=Do not take credit for someone else’s work, you’re wasting your time.\n\nIf you edited someone else’s stickfigure, NAME THEM as a co-author.\n\nIf you did edit someone else’s stickfigure, the edits need to be significant enough to be approved. Simple edits are denied.

submissionRule2Title=Rule Number Two
submissionRule2Info1=Please only submit non-generic, well-made stickfigures.
submissionRule2Info2=Submissions will not be approved unless they are of high quality, funny, interesting, or useful.\n\nThere is strict quality control, anything \”ugly\” or not made well will be denied. This includes stickfigures that are hard to use or have an unreasonable amount of nodes.

submissionRule3Title=Rule Number Three
submissionRule3Info1=Save all stickfigures at proper SCALE and left/right DIRECTION.
submissionRule3Info2=This only applies if you are submitting a pack of limbs for a character.\n\nDo not save the files where the head is double the size of the body, or the arms are pointing left and the body is pointing right, or anything similar to this.\n\nDo not tell the users to resize, YOU resize the files and save them properly first.\n\nPacks not following this rule will be denied immediately.

requestSaveZipTitle=Request to Save ZIP Files
requestSaveZipInfo=Below are the contents of the ZIP file. Select the files you wish to download to your device. If you want, you may also rename any files as you please.\n\nBelow, add a prefix to the beginning of each filename. This will help group the files together alphabetically, but is not necessary.
optionalPrefix=Prefix (Optional)
selectAll=Select all

zipImportedInfo3=The selected files inside the ZIP have been saved, and can be accessed from the “Import” window now.

changelogTweaks=Many other small tweaks, check the website for more information (http://sticknodes.com)

skinSetting=Skin (Custom skins: {0})
dark=Dark
custom=Custom

mcCameraOffset=Adjust camera preview
offset=Offset
zoom=Zoom

incrementTracedFrame=Increment the traced frame number as you add/remove frames?

frame=Frame

removeFromCacheTitle=Remove Movieclips From Cache
removeFromCacheInfo=Caching is a great way to reduce lag when using Movieclips, specifically non-animated Movieclips.\n\nIt is highly recommended to place all complex backgrounds – or even high-node objects like a weapon or a car – into a single-frame Movieclip, and to cache this Movieclip when using it in your project.\n\nCaching turns the Movieclip into an image, so it will no longer look sharp and crisp, especially when zooming in. This is only temporary and will NOT look like that when exported. You will notice a significant lag reduction when doing this properly (it may not be beneficial to cache a very lightweight object with minimal nodes, for example).\n\nCurrently you can only have {0} cached Movieclips at a time, below is a list of what Movieclips are currently cached.
remove=Remove

cannotCacheTitle=Cannot Cache
cannotCacheInfo1=This Movieclip at frame {0} is already cached.
cannotCacheInfo2=Currently only {0} different Movieclips can be cached at a time.

cacheReduceLag=Cache\n(Reduce lag)

serviceTitle={0} is running…
serviceText=This service keeps the {0} app alive in the background

showQuickResizeTools=Show quick resize tools

androidFilesOpenWithTitle=How To Get Files Into Stick Nodes
androidFilesOpenWithMessage=Stick Nodes used to scan your device’s downloads folder for new files, but this has changed!\n\nTo get Stick Nodes files into the app: After downloading the file, select it and use “Open With” to open with Stick Nodes.\n\nCompatible files are ZIP, NODES, NODEMC, STKNDS, STK (and MP3 files, for Pro). By doing this, the file will be moved to the proper Stick Nodes folder location, and can be imported/opened with the app.
androidOpenWithError=Sorry, Stick Nodes couldn’t read this file to properly open it. Stick Nodes can read ZIP, NODES, NODEMC, STKNDS, STK (and MP3 files, for Pro).
okayDoNotShowAgain=Okay, do not show again

curveRadius=Curve radius

changelog07=Segments can now be curved.
changelog01=Many internal updates and changes to improve stability.
changelog02=Added “Quick Resize Tools” that show when selecting a figure/textfield. Can be disabled in “View Options”.
changelog03=Zoom increased to maximum of 5,000%.
changelog04=Many bug fixes, see the website for more information (http://sticknodes.com).
changelog05=(ANDROID) The app no longer automatically scans your /downloads/ folder for Stick Nodes files. You will have to manually “Open With” > “Stick Nodes” files such as NODES, STKNDS, MP3, etc.
changelog06=(ANDROID) The app launches a notification service on startup to (try to) prevent the app from being reset when put in the background.
changelog08=(3.2.1) Many bug fixes, see the website for more information (http://sticknodes.com).